Honsberg-MFI447 電磁式流量計

型號 : Honsberg-MFI447

 Very compact design
 High precision (± 0.5 %) with flow speed
   > 0.5 m/s (optional ± 0.3 % for nominal widths DN3..DN15)
   < ± 1% for DN1 and DN2
 No moving parts in the medium being measured
 Measurement of flowing, pulpy, or pasty media
 Continuously variable housing rotation (± 170°)
 Operation from outside without aids
 Conformity in accordance with EHEDG, 3-A
 CIP- / SIP capable
 Integrated electronic flow meter
 Integrated dosing control (optional)

Auxiliary voltage
18..30 V DC, max. 100 mA
Power consumption
max. 5 W
Electrical connection
M12 plug, 5-pin
Galvanic separation
Sensors / auxiliary volt., outputs / housing
CE conformity 
EN 61326-1:2006-10,
EN 61326-2-3:2007-05
Environmental conditions
Environmental
temperature
-20..+60 °C
Climate classification
EN 60068-2-38:2010-06
Vibrations
EN 60068-2-6, GL test2
Approval
Conformity: EHEDG, 3-A
Metering range
0..12 m/s
Basic precision
±1 % (DN1 and DN2)
±0.5% optional ±0.3 % v. M. (DN3..DN15)
Min. conductivity
> 5 μS/cm,
> 20 μS/cm for demineralised water
> 20 μS/cm for DN1..DN2
Process temperature 
-20 .. +130 °C, 150 °C < 60 min
CIP-/SIP-capable (Tenv. 25°C)
Process pressure
DN3..DN40 ≤ 40 bar
DN50, DN80 ≤ 16 bar
DN1, DN2, DN65, DN100 ≤ 10 bar
Process material
PFA cladding
(DN3..DN100, FDA-compliant),
PEEK cladding (DN1..DN2),
1.4539 electrodes, 1.4435 pipe connection
EPDM seal (FDA-compliant)
Suitable for foodstuffs use in accordance with EHEDG
Process connection
TriClamp, SMS, DIN11851 milk tube
DIN11864 Südmo aseptic connection,
Tuchenhagen flange, APV flange
⅛' sanitary connection (DN1..DN2)
Housing
Round stainless steel housing Ø 79 mm
Material
1.4305
Ingress protection 
IP67 / IP69K
Viewing window
Acrylic glass (PMMA)
Analogue
Active, 0/4..20 mA, Resistance < 600 Ohm
Switching outputs
2 x transistor PNP / NPN programmable
max. 30 V DC,100 mA
Programmable as:
- Pulse output (max. 10 kHz)
- Switching output
- Control input
Display
backlit graphic LCD
Operation
4 capacitive buttons